Audi key programmer for bcm2 cars: Audi and Tuareg

£2,149.00

Audi BCM2 Key Programmer

NO PC NEEDED/NO PRESSING BUTTONS – JUST PLUG THE DEVICE INTO OBD AND LEARN KEY IN 25 SECONDS

Description

Audi BCM2 Key Programmer

NO PC NEEDED/NO PRESSING BUTTONS – JUST PLUG THE DEVICE INTO OBD AND LEARN KEY IN 25 SECONDS
Supported models:
– Audi A4 (B8) Type 8K 2008+
– Audi A5 2007+
– Audi S5 (B8) 2009+
– Audi RS5 2010+
– AUDI RS4 2010-2012
– Audi RS6
– Audi Q5 2007+
– Audi A6 (C7) Type 4K 2010+
– Audi A7 Sportback 2010+
– Audi A8 (D4) Type 4H 2010+
– VW Tuareg Type 7P5 2010+
-Audi R8 up to 2011 The BCM2 key
-learning device is dedicated to program keys for the vehicles equipped with the BCM2 module. The key-learning device is equipped with a key programmer, which allows to pre-code the blank keys How to use key programmer for Audi/Tuareg BCM2 1. added Alarm OFF function: DIP switch position 5 state “ON” Alarm OFF: ======================================================== DIP switch: 12345678 DIP switch: xxxx1xxx Alarm OFF function is set: (step1): (DIP switch position 5 must be “ON”, all others “OFF”) After ~10 seconds Procedure will finish with device beep & green led will go on. ======================================================== Key Learn: ======================================================== DIP switch: 12345678 DIP switch: 1x11xxBA AB: Number Of Keys To Learn: ————————– AB | Number Of Keys To Learn | 01 | 1 | 10 | 2 | 11 | 3 | 00 | 4 | ————————– Key Learn procedure: Plug device to vehicle OBDII connector. (step1): Reading data from the car: After ~10 seconds device will start blinking red/yellow/green. Unplug & Plug BCM2 power connectors (black & brown). Procedure will finish with device beep & green led will go on. (step2): Making Dealer Key: Device yellow led will start blinking. Put Key Fob in device coil. Procedure will finish with device beep & green led will go on. Remove Key Fob from device coil. (step3): Learn Key(s) (new dealer key & old keys): Device green led will start blinking. Plug first key in vehicle key holder for maximum ~10 sec, then unplug. Plug next key in vehicle key holder for maximum ~10 sec, then unplug. … Plug last key in vehicle key holder for maximum ~10 sec, then unplug. Procedure will finish with device beep and green led will go on. The device has the following modes of operation: *program 1 to 8 keys to the car *Check whether key is blank *Switch the alarm OFF Our device needs 25 seconds to learn a key,
Also it supports BCM2 modules xx0907064xx, 8K0907289C